The service menu may be used to set up certain parameters, as indicated below. It should not be used
unnecessarily, and should not be used to set parameters which the tv is physically unable to follow
i.e. do not attempt to convert from UHF UK PAL to VHF RUSSIAN SECAM.
Entering The Service Menu:-
The service menu is entered by pressing the <SUB-PAGE> key on the RC and
<VOLUME-DOWN> key on the TV simultaneously when the TV is in TV- mode.
The service menu is left by pressing the <TV> key.
When entering the service mode the first menu item is IF (selection of normal IF). Next items can be selected
using the keys <PROGRAM-UP> and <PROGRAM-DOWN>. The value of each item can be changed
using the keys <VOLUME-UP> and <VOLUME-DOWN>. The item values are displayed as decimal values,
except for the tuner-band-selection, BITS and option items. They are displayed as hexa-decimal values.
All values are stored in non-volatile memory when the service menu is left.
The “INIT CTV832U” item initializes the NVM: It clears all names and
tuning information of all programs and writes default values for the service alignments
and preset values in NVM.
While doing so, the OSD displays “BUSY”. When the initialization is finished,
the message "READY” is written on the screen.
SERVICE MENU Item DefauIt Explanation IF 38.9 IF selection (58.8, 45.8, 38.9 or 38.00 MHz) IFL1 33.9 IF for SECAM-L1 selection (33.4 or 33.9 MHz) HP 31 Horizontal parallelogram HB 31 Horizontal bow EW 37 East-west Width for picture setting 16:9 PW 18 East-west Parabola for picture setting 16:9 UCP 13 East-west Upper Corner parabola for picture setting 16:9 LCP 13 East-west Lower Corner parabola for picture setting 16:9 TC 28 East-west Trapezium for picture setting 16:9 HP4:3 31 Horizontal parallelogram for picture setting 4:3 HB4:3 31 Horizontal bow for picture setting 4:3 EW4:3 45 East-west Width for picture setting 4:3 PW4:3 15 East-west Parabola for picture setting 4:3 UCP4:3 35 East-west Upper Corner parabola for picture setting 4:3 LCP4:3 25 East-west Lower Corner parabola for picture setting 4:3 TC4:3 31 East-west Trapezium for picture setting 4:3 HS 31 Horizontal Shift VS 31 Vertical Slope VA 31 Vertical Amplitude SC 31 S-Correction VSD off Vertical Scan Disable VSH 31 Vertical Shift VX 25 Vertical zoom (East-west only) BLR 7 Black Level Red BLG 7 Black Level Green WPR 31 White point correction Red WPG 31 White point correction Green WPB 31 White point correction Blue Ys 15 Y-delay adjustment for SECAM Yn 8 Y-delay adjustment for NTSC YP 0 Y-delay adjustment for PAL Yo 0 Y-delay adjustment for external sources AGC 4 AGC take over CL 4 Cathode drive level Bits 00 (ACL=0; FCO= 0; SVO= 0; HP2= 0; FSL= 0; OSO= 0) Bits1 00 (FFI= 0; TV= 0; AV-1= 0; AV-2= 0; AV-2S= 0; AV-3= 0; AV-3S= 0; AV = 0) OptByte1 (Default=E3) PAL-BG = Selection PAL-BG (1) PAL-DK = Selection PAL-DK (1) PAL-I = Selection PAL-I (0) PAL-M = Selection PAL-M (0) PAL-N = Selection PAL-N (0) NTSC-M = Selection NTSC-M (1) NTSC-443 = Selection NTSC-443 (1) SECAM-BG = Selection SECAM-BG (1) *(1) Selected, (0) Not Selected OptByte2 (Default=07) SECAM-DK = Selection SECAM-DK (1) FRANCE = Selection FRANCE (1) WEB = Enable/Disable (1/0) PalBG Scr = When the PalBG Scr selected, TV searches only PalBG. Otherwise it searches all. (0) AV2 = Selection AV2 (0) *(1) Selected, (0) Not Selected OptByte3 (Default=E8) = (0) JR = (0) HP = (0) Vol Bar = (1) Sub Wof = (0) Presets = (1) Lock = (1) Hotel = (0) When the Hotel mode selected, It’s impossible to enter menu settings.lt selects the Hotel mode. (1) *(1) Selected, (0) Not Selected OptByte4 (Default=B8) 16:9 = Set 16:9 mode active (1) 110 = Selection 110/90 Tube (1/0) Hpol = Default (0) Vpol = DefauIt (0) Field = Default (1) FE-Out = Default (1) Sw-on = When the power on the TV, it Enables or Disables Standby Mode. (1/0) Vg-Check = Default (1) *(1) Selected, (0) Not Selected OptByte5 (Default=09) Clock = Enable/Disable Clock Menu (1) AM/PM = (1) AVL = Auto Volume Level (1) = (0) 1-normal = Default (0) Flof-Txt = (0) TR = (0) DVD Start = (0) *(1) Selected, (0) Not Selected TUNER PARAMETER IN SERVICE AND DEFINITION PHILIPS OREGA TEMIC SAMSUNG ALPS TSL Start frequency of the low-band in MHz 45 45 45 45 45 TEL End frequency of the low-band 160 118 150 150 180 TSM Start frequency of the mid-band 160 118 150 150 180 TEM End frequency of the mid-band 440 400 440 425 465 TSH Start frequency of the high-band 440 400 440 425 465 TEH End frequency of the high-band 863 865 865 865 900 TBL hex Value needed for switching to the low-band A1 03 01 01 01 TBN hex Value needed for switching to the mid-band 92 06 02 02 02 TBH hex Value needed for switching to the high-band 34 85 04 08 0C SL 45 Start frequency of the low-band in MHz TEL 118 End frequency of the low-band TSM 118 Start frequency of the mid-band TEM 400 End frequency of the mid-band TSH 400 Start frequency of the high-band TEH 863 End frequency of the high-band TBL 03 hex Value needed for switching to the low-band TBN 06 hex Value needed for switching to the mid-band TBH 85 hex Value needed for switching to the high-band 16:9 / 4:3 Adjustment The CTV832U software uses two sets of parameters for the registers HP (horizontal parallelogram), HB (horizontal bow), EW (EW width), PW (parabola/width), UCP (upper corner parabola), LCP (lower corner parabola) and IC (EW trapezium). They occur in the service menu for 16:9 screen with the listed abbreviations. For the 4:3 screen there is a second set of these registers. They occur in the service menu with the extension ‘4:3’ (i.e. HP4:3, HB4:3,...). Each register set must be adjusted under the right conditions i.e. the 16:9 settings are adjusted with a 16:9 picture - the 4:3 settings with a 4:3 picture. The inenu items EW, PW, UCP, LCP, TC, HP4:3, HB4:3,... TC4:3 and VX will only be in the service menu if the option 16:9 is set in 4 th option byte. OptByte6 (Default=00) UOC-J = Default (0) ignrSUP = Default (0) ignrNDF = Default (0) Pal-BG/DK = (0) Pal-L = (0) Eco = (0) WEB ST = (0) WSS = (0)